| Document |
Description |
TECHNICAL
BULLETIN #4 (11k)
|
Recommended
Lubricants for M-D Rotary Blowers and Vacuum Boosters |
| TECHNICAL
BULLETIN #7 (16k) |
Vacuum
Booster Data Sheet |
| TECHNICAL
BULLETIN #13 (39k) |
Typical
Seal Configurations |
| TECHNICAL
BULLETIN #15 (19k) |
Guide
to M-D Model Numbers |
| TECHNICAL
BULLETIN #22 (14k) |
Recommendations
and Guidelines for Water/Liquid Injected Blowers |
| TECHNICAL
BULLETIN #23 (20k) |
Notes
and Features for ACOUSTICAIR™ Low Noise Rotary Blowers |
| TECHNICAL
BULLETIN #24 (17k) |
Allowable
Overhung Loads for M-D Blowers |
| TECHNICAL
BULLETIN #25 (15k) |
Instructions
for Injecting Fuel Oil, Kerosene and Lube Oil Into Blowers
Handling Sewage Gas |
| TECHNICAL
BULLETIN #26 (7k) |
Blower
Speed and Reliability |
| TECHNICAL
BULLETIN #27 (14k) |
Recommended
Guidelines for Rotary Positive Displacement Blowers in Oxygen
Service |
| TECHNICAL
BULLETIN #28 (7k) |
Advantages
of Rotary Positive Displacement Blowers Versus Centrifugal Blowers |
| TECHNICAL
BULLETIN #29 (15k) |
Avoiding
Blower Problems With Mechanical Seals on Process Services Such as
Steam, Vapor, Liquid Injected or Mixed Phase Inlets |
| TECHNICAL
BULLETIN #30 (22k) |
Blower
markets by industry and application |
| TECHNICAL
BULLETIN #31 (15k) |
Blanketing
the Oil Sumps of Gas-tight Rotary Blowers and Mechanically Sealed
Vacuum Boosters |